Number of driver championships
Number of team championships
Number of wins
Number of starts
Number of times miles driven around Earth
Number of track records|
Posted by Kent Welker at 07:13 PM on Dec 31, 2007
Post #1
Okay got my ECCI installed after a little rebuild. Wanted to understand how the pedal assembly works so I tore it apart. Seems the Brake pedal PMB Cam Plate doesn't line up to well with the pot follower arm and can easily fall out. Also cannot seem to get the calibration perfect like with the Throttle. Did a few laps at Monza and I can say this is going to take some time to adjust to. What wheel range do you all use? 180 or 270? This one is set up with 180 right now and feel ike I really need to put a lot of input into the wheel in the tighter corners causing quite a lot of understeer. Wondering if 270 would make that better or worse. More as I get some more time in on it. |
|
Posted by Jeff Stibling at 07:17 PM on Dec 31, 2007
Post #2
My wheel is set at 210, I just didn't like the full 270, But thats only a preference. I have not ever needed to adjust anything, its worked perfectly right out of the box. Email ECCI , they are pretty good responding thru email. |
|
Posted by John Dixon at 08:59 AM on Jan 01, 2008
Post #3
Congrats on your new kit Kent. I have Ecci pedals but run them with a G25 wheel. When I was at George's house I had a go of his ECCI wheel and I do remember experiencing a lot of turn in understeer. However at the time I put that down to the way George likes it. Its beautiful kit though! |
|
Posted by Mark Cowan at 09:10 AM on Feb 19, 2008
Post #4
|
|
Posted by Timon Bolier at 07:24 PM on Apr 21, 2008
Post #5
Well it's not a secret, but i got Mark Cowans ECCI setup now since begin april as he kinda left active sim racing for real life racing he said. Lovin' ECCI here! Rig is here: http://forum.racesimcentral.com/showthread.php?t=315481 |
